The CM2-WS is a replacement wind speed sensor for the CM2000 Professional Weather Station.
|Wind Speed Range||0-100mph|
We love creating bespoke versions of our mounted weather dial gift sets for our customers. They’ve become so popular that we’ve decided to add a permanent ‘create your own’ version to our range.
Design your own mount board with three simple steps.
Choose from our simple and elegant driftwood-inspired boards or our more adventurous surf-inspired styles. Both types of mount board are available in small or large, depending on the number of dials you’re looking to mount. See the Specification tab for more details.
We can add a personalised plaque to your order engraved with your own unique message. There is a limit of 40 characters for this service, and engraved mount boards can only be hung vertically.
Once you’re happy with your choice of mount board and personalisation below, click add to basket.
Lastly, choose your miniature weather dials. Choose from: Barometer, Clock, Thermometer, Hygrometer, Tide Clock and Moon Phase Clock. All mini dials are 4.5 inches in diameter and available in four colours: Slate Grey, Classic Cream, Rose Copper and Golden Bronze. You can select your miniature weather dials here. Be sure to add both your mount board and your miniature weather dials to basket before checking out.
|Small Surfboard Mount Board (One Mini Dial)||16 inches x 6.25 inches|
|Large Surfboard Mount Board (Two Mini Dials)||24 inches x 9 inches|
|Small Drift-Inspired Mount Board (Two Mini Dials)||15.5 inches x 6.25 inches|
|Large Drift-Inspired Mount Board (Three Mini Dials)||21.25 inches x 7.25 inches|
The CM7-TX temperature transmitter is compatible with the ClimeMET CM7048 Wireless Temperature Station but can also work as a digital thermometer on its own. When used with the 7048, it allows you to measure the temperature in additional locations.
The CM7048 can display temperature data from 3 sensors in total, and comes with one included, allowing you the option to add 2 additional sensors. Ideal if you're looking to measure temperature in the garden and the greenhouse.
The 7-TX can also be used as a replacement for a damaged CM7048 sensor, or can be used as a standalone unit to show temperature for a given location.
To set up your new CM7-TX sensor, follow the pairing instructions below:
* Take batteries out of both the console and your sensor and leave them both powered down for about 30 minutes
* The batteries need to put back in both parts in quite quick succession (within about 15 seconds) so we often suggest putting one battery into each unit and then you'll just need to add the remaining ones when you power them back up.
* Put the batteries back into your outdoor sensor first and then into your indoor console.
* Leave both parts next to each other for around 15 minutes to give the indoor console time to pick up the reading from the outdoor sensor. You can then move your outdoor sensor into position.
|Transmission Frequency||433 MHz|
|Transmission Distance||100 metres (in open field)|
|Dimensions||91 x 70 x 32.5mm|
|Power Requirements||2 x AAA batteries|
A replacement console for the CM7048 Wireless Temperature Station.
To set up your new CM7048 console, follow the pairing instructions below: