£12.50
The CM7-TX temperature transmitter is compatible with the ClimeMET CM7048 Wireless Temperature Station, and allows you to measure the temperature in additional locations.
The CM7048 can display temperature data from 3 sensors in total, and comes with one included, allowing you the option to add 2 additional sensors. Ideal if you're looking to measure temperature in the garden and the greenhouse.
The 7-TX can also be used as a replacement for a damaged CM7048 sensor, or can be used as a standalone unit to show temperature for a given location.
To set up your new CM7-TX sensor, follow the pairing instructions below:
* Take batteries out of both the console and your sensor and leave them both powered down for about 30 minutes
* The batteries need to put back in both parts in quite quick succession (within about 15 seconds) so we often suggest putting one battery into each unit and then you'll just need to add the remaining ones when you power them back up.
* Put the batteries back into your outdoor sensor first and then into your indoor console.
* Leave both parts next to each other for around 15 minutes to give the indoor console time to pick up the reading from the outdoor sensor. You can then move your outdoor sensor into position.
| Transmission Frequency | 433 MHz |
| Transmission Distance | 100 metres (in open field) |
| Dimensions | 91 x 70 x 32.5mm |
| Power Requirements | 2 x AAA batteries |
£17.50
A replacement console for the CM7048 Wireless Temperature Station.
To set up your new CM7048 console, follow the pairing instructions below:
£17.95
The 9-TH Thermo/Hygro transmitter shows temperature and humidity readings.
It is available as a replacement outdoor sensor for the CM9088 Forecast Station, or can be used as a standalone unit to show temperature and humidity readings for a given location.
To set up your new CM9-TH sensor, follow the pairing instructions below:
* Take batteries out of both the console and your sensor and leave them both powered down for about 30 minutes
* The batteries need to put back in both parts in quite quick succession (within about 15 seconds) so we often suggest putting one battery into each unit and then you'll just need to add the remaining ones when you power them back up.
* Put the batteries back into your outdoor sensor first and then into your indoor console.
* Leave both parts next to each other for around 15 minutes to give the indoor console time to pick up the reading from the outdoor sensor. You can then move your outdoor sensor into position.
| Transmission Frequency | 433 MHz |
| Transmission Distance | 100 metres (in open field) |
| Dimensions | 91 x 70 x 32.5 mm |
| Power Requirements | 2 x AAA batteries |
£39.95
A replacement console for the CM9088 Temperature And Humidity Forecast Station.
To set up your new CM9088 console, follow the pairing instructions below:
Subscribe to our newsletter for the latest ClimeMET news
© 2018 ClimeMET. Company Registration No. 9052289
