£10.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a ClimeMET gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Perfect for those picky parents, choosey children and fussy friends!
£99.95
Save £5 on our CM5201 Installation Kit when purchased with the CM2016 with discount code INSTALL.
The new ClimeMET Weather Station CM2016 is packed with features but simple to use, making it the ideal system for weather enthusiasts looking for great value. The impressive range of weather information spans from temperature and humidity through to wind speed and storm warning alerts.
The 2016 comes complete with an outdoor thermo/hygro sensor, rain gauge and wind speed only sensor; easily mountable on the included installation pole and brackets. Unlike some more entry-level weather stations, the CM2016 is a weather station with pressure data so it can be used as a digital barometer.
Please Note: This weather station has no PC connection and cannot be used in conjunction with weather software or dataloggers.
Outdoor Temperature Range | -40°C to +65°C |
Indoor Temperature Range | 0°C to +60°C |
Temperature Resolution | 0.1°C |
Humidity Range | 10%~99% |
Humidity Resolution | 1% |
Rain Volume Range | 0 to 9999mm |
Rain Resolution if rain volume < 1000mm | 0.3mm |
Rain Resolution if rain volume > 1000mm | 1mm |
Wind Speed Range | 0~180km/h |
Pressure Range | 300-1100hPa (8.85-32.5inHg) |
Pressure Resolution | 0.1hPa (0.01inHg) |
Pressure Accuracy | +/-3hpa under 919-1100hPa |
Transmission Frequency | 868MHz |
Sensor Measuring Interval | 48 seconds |
£29.95
Save £5 on our CM5201 Installation Kit when purchased with either our CM2000 or CM2016 Weather Station with discount code INSTALL.
Complete with handy step-by-step instructions, our ClimeMET installation kit is ideal for pole mounting your weather station outdoors to ensure a sturdy setup, and accurate readings.
The user guide takes you through: where to locate your weather station, connecting the poles to create the mast, how to affix the bracket, connecting the mast to the bracket, and attaching your ClimeMET CM2000 Weather Station to the installation kit.
This installation kit is also suitable for use with other weather stations, including the ClimeMET CM2016 Weather Station, and rain gauge shelves.
This installation kit is available in two sizes to suit your requirements - 'Mini' and 'Maxi'. Please see the 'Features' and 'Specification' tabs for more details.
Mini Installation Kit Full Height | 70cm |
Mini Installation Kit Weight | 0.45kg |
Maxi Installation Kit Full Height | 117cm |
Maxi Installation Kit Weight | 0.5kg |
£50.00
Welcome to the new and improved ClimeMET Wireless Forecast Station. The 9088 can be set up to measure indoor and outdoor temperature and humidity, pressure, sunrise and sunset times and moon phase for your home or garden.
You’ll be able to store your very own historical minimum and maximum records for temperature, humidity and pressure, whilst also being able to set various weather alarms to alert you to different weather conditions.
New to the 9088 are sunrise and sunset times, along with a graphical moon phase display. On setup, simply enter your location’s longitude and latitude for accurate forecast information unique to your location. These updated features make this forecast station the ideal choice for hobby gardeners, anglers and astronomers.
Please note previous releases of the 9088 work with all components of the 2021 station release. All 2021 CM9 sensors take around 15 minutes to connect to a 9088 display console.
Indoor Temperature Range | 0°C to 60°C |
Outdoor Temperature Range | -40°C to +65°C |
Temperature Accuracy | +/-1.0°C |
Indoor Humidity Range | 1%RH ~ 99%RH |
Outdoor Humidity Range | 20%RH ~ 95%RH |
Receiver Dimensions | 185 x 100 x 35mm |
Sensor Dimensions | 91 x 70 x 32.5mm |
Batteries (not included) | 3 x AA batteries; 2 x AA batteries |
£36.50
Keeping track of how the climate changes through the seasons can unlock a greater understanding of the world around us. The brand new CM7058 Temperature & Humidity Station from ClimeMET can help you to create a home weather network that allows you to monitor the weather at a glance – while also providing a specialised forecast based on your immediate surroundings.
Simple to set up and complete with a guide for helping you identify the best-placement around your home and garden, the CM7058 is suitable for newcomers looking to keep a closer eye on weather conditions as well as those looking for multi-location monitoring both indoors and out - thanks to the brand new CM7 Temperature & Humidity Sensor.
Minimum/Maximum measurements will be automatically logged on the display console allowing you to quickly check the records for each individual sensor with ease, while the new Sensor Search function can reset connections with any CM7 Sensors in moments. An update on the original CM7048, the ClimeMET CM7058 includes Scroll Mode, allowing you to see cycling data from your network of sensors on your console. It also features pressure data, allowing for more accurate forecasting compared to previous models.
A CM7-PA power supply is available separately – allowing you to keep the indoor display console powered up at all times without requiring batteries.
The CM7058 comes complete with one CM7 Sensor and is able to receive up to eight in total. There’s never been an easier way to bring the great outdoors into your home!
Transmission Frequency | 433 MHz |
Transmission Range | Up to 100m |
Update Interval | 60 seconds |
Indoor Temperature Range | 0 to 60 °C |
Outdoor Temperature Range | -40 to 60 °C |
Indoor Humidity Range | 10 to 99 % |
Outdoor Humidity Range | 10 to 99% |
Barometric Pressure Range | 300 to 1100 hpa |
Temperature Accuracy | +/- 1°C |
Humidity Accuracy | +/- 5% |
Barometric Pressure Accuracy | +/- 3hpa |
Temperature Resolution | 0.1°C |
Humidity Resolution | 1% |
Barometric Pressure Resolution | 0.1 hpa |
Sensor Dimensions | 110mm x 45mm x 20mm |
Console Dimensions | 155mm x 85mm x 27mm |
Sensor Power Requirements | 2 x AAA Batteries |
Console Power Requirements | 4 x AAA Batteries |
£59.50
Whether it’s helping a garden to thrive or dampening a day out, there’s no avoiding the rain in our day-to-day lives – especially in Great Britain! Having a rain gauge at home is a great way to get to know your garden better.
The new ClimeMET CM7015 Wireless Rain Gauge has been designed with convenience and reliability in mind. A robust tipping mechanism within the rain cone allows rainwater to trickle out naturally, while any small blockages that may build up over the years are easily cleared with a quick wipe of the removable side trays.
The easy-to-use display console includes a customisable history graph that lets you view recent rainfall, temperature or humidity information with the touch of a button, while our new Sensor Search function can reset connections with all external sensors without you needing to set foot outside. You can also set a variety of custom alerts, so when the rain starts to fall you’ll be the first to know!
Also making use of the brand new CM7 Temperature & Humidity Sensor, the CM7015 Rain Gauge can be depended upon for accurate measurements throughout frosty mornings and summer sunshine.
A CM7-PA power supply is available separately – allowing you to keep the indoor display console powered up at all times without requiring batteries.
The CM7015 comes complete with one CM7 Sensor and is able to receive up to eight of these in addition to the rain sensor, so the next time it’s a rainy day you can keep a step ahead.
Transmission Frequency | 433 MHz |
Transmission Range | Up to 100m |
Update Interval | 60 seconds |
Indoor Temperature Range | 0 to 60 °C |
Outdoor Temperature Range | -40 to 60 °C |
Indoor Humidity Range | 10 to 99 % |
Outdoor Humidity Range | 10 to 99% |
Rainfall Range | 0 to 9999mm |
Temperature Accuracy | +/- 1°C |
Humidity Accuracy | +/- 5% |
Rainfall Accuracy | +/- 1mm |
Temperature Resolution | 0.1°C |
Humidity Resolution | 1% |
Rainfall Resolution | 0.3mm |
Outdoor Rain Gauge Dimensions | 207mm x 172mm x 140mm |
Sensor Dimensions | 110mm x 45mm x 20mm |
Console Dimensions | 155mm x 85mm x 27mm |
Outdoor Rain Gauge Power Requirements | 4 x AAA Batteries |
Sensor Power Requirements | 2 x AAA Batteries |
Console Power Requirements | 4 x AAA Batteries |
£15.95
Designed to work with the CM7058 Temperature & Humidity Station and the CM7015 Wireless Rain Gauge, the brand new CM7 Sensor will measure and deliver weather data to your internal display console rain or shine. Position your CM7 sensors indoors or out to monitor the locations that matter to you.
The sensor tracks the temperature and humidity of its location, shown on an LCD screen for easy reference at a glance. With a transmission range of 100 metres and a variety of mounting options, the CM7 Sensor provides a flexible way of monitoring weather conditions around the home and garden.
Up to eight CM7 Sensors can be used alongside the CM7058 and CM7015 Stations, utilising a numbered channel setting so that specific locations can be pinpointed with ease. If you're lucky enough to have both systems, the two consoles can share your network of sensors allowing you to read your data on either screen.
Transmission Frequency | 433 MHz |
Transmission Range | Up to 100m |
Update Interval | 60 seconds |
Temperature Measurement Range | -40 to 60 °C |
Humidity Measurement Range | 10 to 99% |
Temperature Accuracy | +/- 1°C |
Humidity Accuracy | +/- 5% |
Temperature Resolution | 0.1°C |
Humidity Resolution | 1% |
Dimensions | 110mm x 45mm x 20mm |
Power Requirements | 2 x AAA batteries |
£20.00 £25.00
he UK generated 202.8 million tonnes of total waste in 2014 and it's likely that much of this waste could have been re-used, recycled or reduced in the first place.
One of the initiatives we've introduced is our 'ClimeMET Eco Sale' where we list 'slight seconds' of some of our best-selling products available to buy at heavily discounted prices.
For example, we may have a tide clock that has a slight scratch on the outer casing of the dial. We wouldn't want to sell it at full price and disappoint a customer buying a gift but it may not even be noticeable to you when it's up on the wall, and you could use your saving to buy yourself a surf lesson.
We guarantee that the product will be fully functioning, come in original packaging, with a manual and be covered by a standard one year warranty. Plus, you are welcome to return it if you're not happy with it.
Imperfections vary from product to product. If you would like photos of a specific item prior to purchasing, please email sales@climemet.co.uk. Unfortunately, we are unable to offer personalisation on Eco Sale items. For discounted engraved items, please see our Engraving Sale.
Save the planet and save some money.
£22.00
Suitable for placing in the home or outside in the garden*, build your collection of miniature weather dials.
Choose from our range of tide clocks, clocks, thermometers, barometers, moon phase clocks and hygrometers. If you are opting for a tide clock, please select between our standard tide clock and our limited edition version. They are both the same design but our limited edition tide clock uses the traditional 'High Water' / 'Low Water' wording whilst our standard tide clock uses the more modern 'High Tide' / 'Low Tide' wording.
All available in six beautiful colours to mix and match for your home and garden, these mini weather dials are the perfect little gift to help your loved ones make the most of the great outdoors.
Suitable for mounting with our surfboard and driftwood mount boards.
*Tide clock, clock and moon phase clock suitable for indoor use only as they require 1 x AA battery and do not have a battery cover.
Pressure Range | 713-802mmHg; 950-1070hPa |
Temperature Range | -40 to 60 ̊C; -40 to 140 ̊F |
Humidity Range | 0-100%RH |
Accuracy | +/- 1°C; +/-5%RH |
Dial Diameter | 4.5 Inches |
Battery | 1 x AA Battery required for Tide Clock/Clock/Moon Clock (not included) |
£37.00
Bring memories of the ocean into your home with a tide clock or time clock, mounted onto a unique surf-inspired piece of driftwood.
No matter where we are in life, we still often turn to water for a sense of calmness and clarity, whether walking along the beach or surfing the crest of a wave. With this in mind, our affinity with the sea is reflected with our surfboard mount, complete with ClimeMET clock or tide clock.
The battery-powered clock or tide clock is mounted onto a small distressed wooden surfboard, creating the perfect, leisurely look. For an extra special touch, we can attach a personalised plaque to the timber.
The clocks are available in either cream, a stormy slate grey, copper, or bronze, and will add some oceanic charm to your living room, or look perfect in your home away from home. The surfboard can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
We have a range of dials to choose from so you can collect additional instruments to match your surroundings, whether you’re changing them for the seasons or transforming the setting.
Mount Board Dimensions | 16 inches x 6.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 1 x AA Battery (not included) |
£60.00
Whether you’re passionate about sailing, surfing or kayaking, never miss a wave again with our pair of nautical weather dials.
Pair our ClimeMET tide clock with your choice of wall clock, barometer or thermometer to create the perfect gift for any water sports enthusiast. Designed to synchronise to the lunar cycle, our tide clock rotates once every 12 hours and 25 minutes to indicate both high and low tides, ideal for helping you find that perfect wave.
The battery-powered clocks are mounted onto a small distressed wooden surfboard, creating a relaxed, easy-breezy feel. For an extra special touch, we can attach a personalised engraved plaque to the collection.
The clocks come in either cream, a stormy slate grey, copper, or bronze, and will add some coastal charm to your living room, or look perfect in your home away from home.
The surfboard can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Mount Board Dimensions | 24 inches x 9 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | Tide Clock and Clock both require 1 x AA Battery (not included) |
Thermometer Measurement Range | -40°C to +60°C or -40°F to 140°F |
Barometer Measurement Range | 720-790mmHg or 960-1060mb |
£60.00
Our new Moon and Tide weather dial gift set is inspired by the glisten of moonlight as it dances across the waves.
Our tide clock rotates once every 12 hours and 25 minutes to indicate both high and low tides, working in sync with our 29.5-day cycle moon phase clock - perfectly reflecting those nautical nights. If you're not by the coast, you have the option to swap the tide clock for a traditional time clock.
Hung on a small piece of distressed driftwood-inspired mount board, the battery powered dials are available in silky cream, misty slate grey, rose cooper or golden bronze. For an extra special touch, we can also attach a personalised engraved plaque to the panel.
The wood panel can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Your ClimeMET mount board will arrive unassembled but is very easy to piece together - simply lightly screw the two supplied screws into the pre-drilled holes and hook your dials onto these in the orientation that you desire.
Mount Board Dimensions | 15.5 inches x 6.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 2 x AA Battery (not included) |
£35.00 £70.00
Green living is at the heart of ClimeMET and we are delighted to announce our new Eco Mount Boards. Made from 100% recycled materials, these mount boards are suitable for any two of our miniature weather dials. Available here as 'The Stargazer' complete with moon and time clocks, these mount boards can be customised with your choice of weather dials on our 'Create Your Own' listing.
Our moon clock follows the 29.5-day moon cycle - perfectly reflecting the lunar cycle dancing above us. Complemented by a classic time clock, this set makes a fantastic gift for eco-conscious friends and family.
Our 'Nova' Eco Mount Board has a white, marble-like finish with flecks of gold and silver, achieved by the recycled yoghurt pots that have been re-purposed to create it. Each board is unique and can be engraved in your choice of bronze or silver text, to accompany either Slate Grey or Golden Bronze clocks.
The panel is designed to be mounted vertically and comes complete with both dials affixed. A mounting hook is attached to the back of the mount board for easy wall mounting.
Mount Board Dimensions | 13 inches x 5.6 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 2 x AA Battery (not included) |
£35.00 £70.00
Green living is at the heart of ClimeMET and we are delighted to announce our new Eco Mount Boards. Made from 100% recycled materials, these mount boards are suitable for any two of our miniature weather dials. Available here as 'The Stargazer' complete with moon and time clocks, these mount boards can be customised with your choice of weather dials on our 'Create Your Own' listing.
Our moon clock follows the 29.5-day moon cycle - perfectly reflecting the lunar cycle dancing above us. Complemented by a classic time clock, this set makes a fantastic gift for eco-conscious friends and family.
Our 'Eclipse' Eco Mount Board has a black, translucent finish with flecks of silver, reminiscent of a star-studded night, and achieved by the recycled plastic packaging (such as black plant pots) that has been re-purposed to create it. Each board is unique and can be engraved in your choice of copper or silver text, to accompany either Rose Copper or Classic Cream clocks.
The panel is designed to be mounted vertically and comes complete with both dials affixed. A mounting hook is attached to the back of the mount board for easy wall mounting.
Mount Board Dimensions | 13 inches x 5.6 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 2 x AA Battery (not included) |
£80.00
Fully equipped with our moon, tide and time dials, this gift set is the perfect way to observe the physical link between the moon and tides, the symbolic connection between the heavens and Earth, and the sense of wonder this brings.
Our tide clock rotates once every 12 hours and 25 minutes to indicate both high and low tides, working in sync with our classic time piece and 29.5-day cycle moon phase clock.
Mounted on a small piece of timber board, the battery powered dials are available in classic cream, slate grey, rose copper and golden bronze. To compliment the collection, we can also attach a personalised engraved plaque to the panel.
The wood panel can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Your ClimeMET mount board will arrive unassembled but is very easy to piece together - simply lightly screw the three supplied screws into the pre-drilled holes and hook your dials onto these in the orientation that you desire.
Mount Board Dimensions | 21.25 inches x 7.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 3 x AA Battery (not included) |
£60.00
Hinting at discovery and adventure, our tide, time, temperature and pressure dials mean you’ll be always be ready to tackle (or shelter from!) the elements.
Mounted onto a small piece of distressed driftwood to create a sea-faring, adventurous feel, our pair of tide, time or pressure instruments allow you to predict any ideal or treacherous weather conditions. For an extra special touch, we can attach a personalised engraved plaque to the timber.
Battery-powered, both dials in the pair are available in cream, a stormy slate grey, copper, or bronze, complementing the weather-beaten look while echoing the stunning colours you may see along the spectacular British shoreline.
The driftwood can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Mount Board Dimensions | 15.5 inches x 6.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | Tide Clock and Clock both require 1 x AA Battery (not included) |
Thermometer Measurement Range | -40°C to +60°C or -40°F to 140°F |
Barometer Measurement Range | 720-790mmHg or 960-1060mb |
£80.00
Fully furnished with time, tide and pressure instruments, our dial set means you’ll be perfectly equipped to sail the serene waters of our British coastline.
Our tide clock rotates once every 12 hours and 25 minutes to indicate both high and low tides, working in sync with our classic time piece and pressure-measuring barometer dial, to bring a touch of coastal charm to any location. The ideal gift for any maritime master.
Mounted onto a small piece of distressed driftwood, the battery-powered dials – available in either cream, a stormy slate grey, copper, or bronze - perfectly create its nautical tone. For an extra special touch, we can attach a personalised engraved plaque to compliment the collection.
The driftwood can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Mount Board Dimensions | 21.25 inches x 7.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | 2 x AA Battery (not included) |
Barometer Measurement Range | 720-790mmHg or 960-1060mb |
£80.00
A truly special gift for any green-fingered enthusiast, this picturesque yet practical triple weather dial set combines timeless temperature, humidity and pressure instruments.
Whether in your conservatory, kitchen or study, our wall-mountable thermometer, barometer and hygrometer set ensures you’ll always be aware of your home’s unique micro-climate. This is the perfect gift to turn a grassy retreat into your own personal Kew Gardens.
Combining a rustic, riverine aesthetic with solid sturdiness, our weather dials are mounted onto a natural-hued hunk of driftwood, which can be personalised with your own message on an engraved plaque. Any mini ClimeMET weather dial already owned can be interchanged with those featured.
The driftwood can be wall-mounted either horizontally or vertically but is suitable for indoor use only to preserve the finish of the wood. Please note, personalised mount boards can only be hung vertically.
Mount Board Dimensions | 21.25 inches x 7.25 inches |
Individual Dial Diameter | 4.5 Inches |
Thermometer Measurement Range | -40°C to +60°C or -40°F to 140°F |
Hygrometer Measurement Range | 0% to 100% |
Barometer Measurement Range | 720-790mmHg or 960-1060mb |
£65.00
Do you often find yourself counting the time difference on your fingers trying to work out if it's an acceptable hour to call and connect with your loved one abroad? Let our 'time and time' gift set make life easier for you.
Simply set one clock to the time in your location, and the other to the location of a friend or family member studying or working abroad. Ideal for those in a long distance relationship, or parents with children enjoying a year out from university. Hung on a small piece of distressed driftwood-inspired mount board, the battery powered dials are available in classic cream, slate grey, golden bronze or rose copper.
Enter the names of the two locations you would like to personalise your gift set with and these will be engraved onto two small gold-effect plaques. These could be city names such as London and Hong Kong, people's names such as Jenny and Andrew, or your own nicknames for magical little spots anywhere round the world.
The wood panel is deigned to be mounted vertically and is suitable for indoor use only to preserve the finish of the wood. Please note, you will need to set the time on your clocks to your desired locations using the rotating dial on the back.
Mount Board Dimensions | 15.5 inches x 6.25 inches |
Individual Dial Diameter | 4.5 Inches |
Battery | Both clocks require 1 x AA Battery (not included) |
£20.00
We love creating bespoke versions of our mounted weather dial gift sets for our customers. They’ve become so popular that we’ve decided to add a permanent ‘create your own’ version to our range.
Design your own mount board with three simple steps.
Choose from our simple and elegant driftwood-inspired boards or our more adventurous surf-inspired styles. Both types of mount board are available in small or large, depending on the number of dials you’re looking to mount. See the Specification tab for more details.
We can add a personalised plaque to your order engraved with your own unique message. There is a limit of 40 characters for this service, and engraved mount boards can only be hung vertically.
Once you’re happy with your choice of mount board and personalisation below, click add to basket.
Lastly, choose your miniature weather dials. Choose from: Barometer, Clock, Thermometer, Hygrometer, Tide Clock and Moon Phase Clock. All mini dials are 4.5 inches in diameter and available in four colours: Slate Grey, Classic Cream, Rose Copper and Golden Bronze. You can select your miniature weather dials here. Be sure to add both your mount board and your miniature weather dials to basket before checking out.
Small Surfboard Mount Board (One Mini Dial) | 16 inches x 6.25 inches |
Large Surfboard Mount Board (Two Mini Dials) | 24 inches x 9 inches |
Small Drift-Inspired Mount Board (Two Mini Dials) | 15.5 inches x 6.25 inches |
Large Drift-Inspired Mount Board (Three Mini Dials) | 21.25 inches x 7.25 inches |